Build the ultimate tubeless setup with Barkeeper Tubeless Tape. Whether you're converting new wheels to tubeless, refreshing your current setup, or replacing the factory tape for improved performance.
The tape's unique cross-fiber structure makes tearing a thing of the past. The adhesive has been specifically developed to increase its strength under pressure, providing an optimal seal when the tire is inflated. When it's time to remove the tape, you can do so without leaving any residue. To select the correct width, add 2 to 4 mm to the inner width of your wheels.
PRO TIPS:
- Degrease the rim before applying the tape
- Cut the tape diagonally to prevent it from lifting.
- Overlap the tape over the valve area
- Use a hot needle to pierce the valve hole
DESCRIPTION
Barkeeper Tubeless Tape is the perfect base for your high-performance tubeless setup. Available in 6 different sizes.
✅ Easy to apply
✅ Hi-Tec cross-fiber structure
✅ Ultralight and extremely durable
✅ Residue-free adhesive that strengthens under pressure
It guarantees a tear-free, residue-free, airtight and long-lasting tubeless experience.
APPLICATION
Ensure the rim bed is free of glue and grease residue using a prep spray like Perfect Prep. Select the correct rim tape width by adding 2-4 mm to the inner width of your wheels. Begin applying the tape on the opposite side of the valve hole from where you are looking at the wheel. Apply at least one full wrap, finishing on the other side of the valve hole, thus overlapping the valve hole. Cut the tape at a 45° angle. Apply the sealant patch over the end of the tape for added security. Finally, use a heated, rounded pick to pierce a small hole in the tape above the valve hole, allowing the tubeless valve to pass through.





