Elite Avanti with Zwift Cog and Click

The Elite Avanti with Zwift Cog and Click offers smart, precise, personalized training. Its integrated OTS power meter achieves ±1% accuracy, and automatic resistance simulates gradients of up to 18%. Wi-Fi, Bluetooth® and ANT+ FE-C connectivity makes it easy to sync with indoor training apps.

The black Flex Feet provide 4.5° of lateral micro-movement that follows your pedal stroke. Automatic calibration simplifies setup, and the two independent modes let you adapt use to different connection and power configurations. Its design makes it easy to transport and install compatible bikes.

This model includes Zwift Cog and Click. The Cog is compatible with most 8–13-speed drivetrains, including SRAM Flattop chains; it does not support 13-speed Campagnolo Ekar chains, belt drives or internally geared hubs. The Click controller operates 24 virtual gears in Zwift. To use a mechanical shifter with other apps, the Cog can be replaced with a compatible cassette, sold separately.

Zwift offers special subscription promotions to help you get started with training. Refer to the manual to adjust the adapters and make the most of the trainer's features.

• Integrated OTS power meter with ±1% accuracy.
• Automatic simulation of gradients of up to 18%.
• Wi-Fi, ANT+ FE-C and Bluetooth® connectivity with Bridge function.
• Black Flex Feet for more natural movement and greater comfort.
• Automatic calibration, ERG mode and standalone modes.
• Zwift Cog and Click included for virtual shifting in Zwift.

• Type: Direct-drive smart trainer
• Resistance: Electronically controlled magnetic; continuous adjustment
• Power measurement: Integrated OTS (Optical Torque Sensor) power meter; ±1% accuracy
• Maximum power: 920 W at 20 km/h; 2100 W at 40 km/h
• Maximum simulated gradient: 18%
• Connectivity: 2.4 GHz Wi-Fi, ANT+ and Bluetooth®; two simultaneous Bluetooth connections
• Data transmission: Up to 10 Hz via Bluetooth or Elite Gateway; enable Fast Track in My E-Training with updated firmware
• Features: Automatic calibration, ERG mode with four Power Smoothing options, Easy Start and Supertuck response in Zwift
• Flex Feet: Black included; 4.5° lateral micro-movement. Red 7° feet available separately
• Standalone operation: Powered: preset gradient from 0–18% in My E-Training. Unpowered: 16 preset levels; no data transmission or electronic resistance adjustment during use
• Flywheel: 4 kg
• Dimensions, open: 580 × 700 × 520 mm
• Dimensions, folded: 580 × 210 × 520 mm
• Maximum load: 110 kg
• Power supply: Input 100–240 V, 50–60 Hz, 0.6 A; output 12 V, 1.5 A
• Version: Zwift Cog and Click
• Drivetrains with Zwift Cog: Most 8–13-speed chains, including SRAM Flattop; not compatible with Campagnolo Ekar 13-speed chains, belts or internally geared hubs
• Virtual shifting: 24 gears via Zwift Click in Zwift
• ANT+ protocols: FE-C, Power and Speed&Cadence
• Bluetooth protocols: FTMS, Power, Speed&Cadence and Zwift protocol with compatible firmware
• Network and firmware: Wi-Fi reconnection and automatic updates; Ethernet via optional Elite Gateway
• Bridge: Connects a heart rate monitor and cadence sensor through the trainer; broadcasts an ANT+ signal over Bluetooth
• Cadence: Estimated without an external sensor; supports an external sensor via Cadence Bridge
• Axles with included adapters: 5 × 130/135 mm quick release (skewer included) and 12 × 142 mm thru-axle (uses the bike’s axle)
• Optional adapters: 10/12 × 135 mm (1014306), Specialized SCS 12 × 135 mm (1014087), Boost 12 × 148 mm (1014303), and Super Boost 12 × 157 mm (1014346)
• Cassette with the included freehub body: With the Cog removed: Shimano/SRAM 9/10/11-speed, Shimano road 12-speed, and SRAM SX/NX 12-speed; cassette not included
• Optional freehub bodies: Shimano Micro Spline (1014315), Campagnolo (1014233), and SRAM XD/XDR (1014279)
• Bikes: Road, gravel, MTB, and urban bikes; check the axles, chain, and frame clearance before installation
• Apps: Virtual shifting in Zwift; also in ROUVY with Cog and Click, updated firmware, and the trainer connected via Bluetooth or Wi-Fi. For mechanical shifting, replace the Cog with a compatible cassette
• Shimano Di2 integration: Dura-Ace 9200 and Ultegra 8100; Dura-Ace 9100 and Ultegra 8000 require EW-WU101 or EW-WU111. Lets you control resistance in standalone powered mode or pause the brake for 60 s from the shifters
• Pedal stroke analysis: 24 points per cycle; additional purchase and active My E-Training subscription required
• Total distance: Total Distance in My E-Training, including during standalone powered use
• Ecosystem: Compatible with Rizer, Aria, Zwift Ride, and Square; remove the Cog to install Square
• Transport: Folding legs, handle, and integrated adapter compartment; frame supplied assembled

• Elite Avanti trainer with Zwift Cog and freehub installed
• Zwift Click wireless controller
• Black Flex Feet
• Power supply
• Frame adapter and adapters for 5 × 130/135 mm quick release and 12 × 142 mm thru-axle
• Quick-release skewer
• Front-wheel support
• Two freehub spacers
• Disc brake spacer
• Integrated adapter storage compartment
• Not included: cassette, cassette removal tool, and bicycle thru-axle

13 kg

Legal warranty: 3 years from delivery for consumers in Spain, for lack of conformity.

Additional Elite commercial warranty: up to 4 years total from purchase for a new Avanti purchased for personal use between 01/06/2026 and 31/12/2028. Apply at redeem.elite-it.com within 90 days of purchase, attach proof of purchase, and keep the confirmation. Subject to validation by Elite and its terms and exclusions; it is not automatic.

Exclusions: the extended warranty does not apply to refurbished, used, rental, display, or commercial or professional-use products; it also does not cover normal wear and tear or incorrect use or installation. It is personal and non-transferable. This commercial warranty does not limit the legal warranty or consumer rights.