Favero Assioma Pro RL-1

The Favero Assioma Pro RL-1 are road power meter pedals with a sensor in the left pedal and Look Keo cleats: train with reliable data at the most accessible price in the Look range.

• Single-sided measurement - estimated total power with Assioma accuracy.
• Look Keo cleats - for those who prefer the Keo standard.
• IAV system with gyroscope - consistent readings in any situation.
• 130 g (left) and 129 g (right) - lightweight and easy to move between bikes.

ANT+ and Bluetooth. Up to 160 hours of battery life per charge.

• Type: Single-sided power meter pedals (sensor in the left pedal)
• Reference: 773-30-01
• Measurement system: IAV (Instantaneous Angular Velocity) system with strain gauges integrated into the axle
• Temperature compensation: automatic, ATC system
• Power measurement: Estimated total power (left-leg measurement multiplied by two); no measured left/right balance
• Power range: 0–3000 W
• Cadence measurement: Integrated cadence sensor with internal gyroscope
• Cadence range: 10–250 rpm
• Cleat compatibility: Original Look Keo and Keo Grip; Favero 773-00-70, 773-00-71, 773-00-72, 771-40 and 771-42
• Release tension: adjustable with a 3 mm Allen key
• Oval chainring compatibility: Yes, fully compatible
• Connectivity: ANT+ and Bluetooth (up to 3 simultaneous BLE connections)
• Left-side metrics: PCO, power phase, torque effectiveness and pedal smoothness; via ANT+ or in the Favero Assioma app
• Cyclist position: seated/standing via ANT+; not displayed in the Favero Assioma app
• Bluetooth data: power and cadence
• Battery: Rechargeable lithium-ion battery
• Battery life: up to 160 hours per charge
• Charging: magnetic; approximately 4 h for a full charge
• Fast charging: 15 min of charging for 15 h of use, according to Favero
• Accuracy: ±1 %
• Stack height: 10.5 mm
• Q-factor: +53 mm
• Contact area: 755 mm²
• Water resistance: IP67 certified
• Use: Road cycling / training and racing
• Design: Body made of carbon-fiber-reinforced technopolymer, modular design with interchangeable bodies
• Axle: AISI 630 stainless steel
• Bearings: two needle bearings and one technopolymer thrust washer
• Thread: 9/16"-20 TPI
• Crank compatibility: through-hole and maximum thickness of 15 mm in the threaded area; the plastic end of the axle must protrude by at least 1 mm
• Installation clearance: more than 4 mm between the pedal cap and the chain or frame; do not use pedal extenders or crank shorteners
• Installation torque: pedals 30–40 Nm with a torque wrench (use a 15 mm open-ended wrench to thread them in); cleats 5–6 Nm
• Maximum rider weight: 120 kg
• Operating temperature: −10 to +55 °C
• Recommended charging temperature: +10 to +45 °C
• Manufacturing: Made in Italy
• Activation and updates: free Favero Assioma app for iOS and Android; required to activate data transmission and update the firmware
• Calibration: automatic during use; manual calibration during initial installation and each time they are mounted on another bike
• Bilateral upgrade: with the Assioma PRO RL-UP kit, sold separately; the right pedal with sensor is paired via the app

Left pedal with power sensor

Right pedal without power sensor

Four mounting washers

One magnetic connector and a dual charging cable

Favero cleats compatible with Look Keo, with 5° of float

Lubrication kit

Six cleat washers and six screws

Warranty and safety manual

Welcome booklet

Total set weight: 259 g

Left pedal with sensor: 130 g

Right pedal without sensor: 129 g

3-year legal warranty